LSI ICH6R Manual do Utilizador descarregar pdf (Página 42)

4-6 Operating System Installation

Step 7. Follow the Red Hat Linux installation procedure to complete the

installation.

Step 8. Reboot the system.

4.3.4 SuSE Linux 9.0 Driver Installation on a New System

This section describes the fresh installation of a Linux SuSE 9.0 system with the

Embedded Software RAID Stack. Prepare installation disks with the driver

image, then perform the following steps to install the driver:

Step 1. Boot your system using the SuSE 9.0 CD 1.

Step 2. At the prompt, press <F3> to confirm that you have a driver diskette.

Step 3. Highlight Installation on the menu using the arrow keys, then press

<Enter>.

You are prompted for the diskette.

Step 4. Insert the driver update disk in the A:/ drive and press <Enter>.

The message “Driver Updates added” displays.

Step 5. Press <Enter>.

You are prompted to select the Driver Update Medium.

Step 6. Select Back and press <Enter>.

This returns you to the installation.

Step 7. Press <Accept>.

The driver installation begins.

Step 8. Press <Accept> again.

A warning screen displays to make sure you want to continue the

installation with these settings.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 71 72

Sem comentários

LSI ICH6R Manual do Utilizador Página 42