LSI U160 Manual do Utilizador descarregar pdf (Página 67)

LSIU160 PCI to Single Channel Ultra160 SCSI Host Adapter A-1

3.75 pc 10.25 pc 11.25 pc 38.25 pc

4.333 pc

12 pc

12.938 p

13.851 pc

48.583 pc

52.5 pc

34.5 pc

34.732 pc

Appendix A

Technical

Speciﬁcations

This section discusses the physical environment associated with the

LSIU160. It includes a mechanical drawing of this board, which is shown

in Figure A.1. It also includes these topics:

• Section A.1, “Physical Environment,” page A-1

• Section A.2, “Operational Environment,” page A-4

• Section A.3, “Subsystem and Subsystem Vendor ID,” page A-10

A.1 Physical Environment

This section discusses the physical, electrical, thermal, and safety

characteristics of the LSIU160. Additionally, this board is compliant with

electromagnetic standards set by the FCC.

A.1.1 Physical Characteristics

The dimensions of the LSIU160 are 6.875 x 4.0 inches. PCI connection

is made through edge connector J1.

Internal SCSI connection is made through the 68-pin HD connector J4.

External SCSI connection is made through the 68-pin HD connector J3.

The J3 connector extends external to the cabinet through a bracket

attached to the board and the face of the connector. The bracket is a

standard ISA type with a cutout to accommodate connector J3.

The J6 connector is for connecting to the computer’s drive activity LED.

It is a 4 pin one row right angle header wired in parallel with the on-board

SCSI Activity LED.

The component height on the top and bottom of the board conforms to

the PCI Speciﬁcation Revision 2.2.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 89 90

Sem comentários

LSI U160 Manual do Utilizador Página 67