LSI SATA 150 Manual do Utilizador descarregar pdf (Página 26)

2-2 Hardware Installation

2.2 Hardware Requirements

You must have the following items to install and use a MegaRAID SATA

150 storage adapter:

• A MegaRAID SATA 150 storage adapter and device driver

• Host computer with an available PCI expansion slot

• Serial ATA disk drives and cables

2.3 Quick Installation Instructions

Follow these instructions to install your SATA 150 storage adapter if you

have prior experience installing computer hardware.

Step 1. Unpack the MegaRAID storage adapter and inspect it for

damage.

Step 2. Power down the system and disconnect the power cord.

Step 3. Remove the cover from the computer.

Step 4. Configure the jumpers on the SATA 150 storage adapter.

Step 5. Insert the MegaRAID SATA 150 storage adapter in an available

PCI slot.

Step 6. Configure the Serial ATA devices according to the instructions

for each device.

Step 7. Connect the Serial ATA cables between the SATA 150 storage

adapter and the Serial ATA devices.

Step 8. Replace the computer cover, reconnect the power cord, and

power up the system.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

Sem comentários

LSI SATA 150 Manual do Utilizador Página 26