LSI ULTRA160 Manual do Utilizador descarregar pdf (Página 20)

2-4 Detailed Host Adapter Installation

Figure 2.2 Inserting the Host Adapter

2.2 Connecting SCSI Peripherals

This section provides information about making internal and external

SCSI connections.

2.2.1 Making Internal Wide SCSI Bus Connections

This section provides step-by-step instructions for making internal SCSI

bus connections. These steps refer to connectors that are speciﬁc to the

LSI21003. Internal and external connectors can be 50-pin or 68-pin.

Refer to Section 3.3.1, “Internal SCSI Cables,” page 3-10 for examples

of internal cables.

If you have only external connections, skip to Section 2.2.2, “Making

External SCSI Bus Connections,” otherwise follow these steps:

64-Bit slots

Secure the bracket with the

bracket screw.

Bracket around

connector J3 ﬁts

where blank

bracket panel

was removed.

If you plug a 64-bit card into a

32-bit slot, be careful not to

damage the main board.

32-Bit slots

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 53 54

Sem comentários

LSI ULTRA160 Manual do Utilizador Página 20